This Site

 

 

The writer is making a number of good annotation on the subject of What Would Cause My Electric Water Heater to Stop Working? as a whole in this article beneath.

Numerous modern-day homes take advantage of an electrical water heater for their furnace, due to its comfort and simplicity of use. Nonetheless, just like any other electrical devices, problems might emerge with its usage, suddenly. It can be actually frustrating to get up to a cool shower instead of a hot one or having your bath with water that isn't hot sufficient or perhaps also warm. Whatever the case may be, water heater issues can be rather aggravating. The good news is, we've made a checklist of feasible remedies to your hot water heater concerns. There are a variety of aspects that might trigger much of these issues, it could be a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for security. Whatever the problem is, getting it dealt with must not present excessive of an issue if you follow these actions:

 

Examine Your Power Supply:

As standard as this may appear, it is very essential. Without appropriate power, your hot water heater will not function. So the first thing to do when your water unexpectedly stops working is to validate that it isn't a power problem. Examine if the fuse is blown out or the breaker tripped. If the breaker is the issue, merely turn it on and off again. Change any busted or worn-out fuse. Check the appliance with power after these modifications to see if it's now functioning.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power problem, after that try checking out your burner if it is still working. Check each of your heating elements to ensure the issue isn't with any one of them. If any one of them is damaged, replace that component and then examine whether the hot water is back on.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't warm enough, you might require to examine the temperature level settings on your top thermostat. Guarantee the breaker is switched off prior to doing anything. Open up the access panel as well as press the red button for temperature level reset above the thermostat. This need to assist warm the water. Transform the circuit breaker back on as well as check if the issue has been solved.

 

Call A Professional:

If after changing all defective components and resetting your temperature level, the water heater still isn't functioning, you may require to contact a professional plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have actually been switched or it may be undersized for the quantity of hot water required in your home. Whatever the situation might be, a professional plumber would certainly aid resolve the trouble.

 

Conclusion

Hot water heater troubles are not always significant. Most of them are due to minor problems like a blown fuse or damaged burner. Replacing the defective components need to do the trick. However, if you are still not able to address the trouble, give a call to your nearest plumber to come to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As an enthusiastic person who reads about What Would Cause My Electric Water Heater to Stop Working?, I figured sharing that piece of content was important. Loved our content? Please share it. Let another person locate it. I praise you for your time. Visit again soon.

Make An Appointment